RAIS Bionic Fire User Manual download pdf (Page 48)

English RAIS - manual for

Interruption of operation

Smoke spillage around door:

could be due to too low draught in the chimney <12Pa

• check whether the ﬂue or chimney is blocked

• check whether the extraction hood is switched on; if it is, switch it off and open a

window/door in the proximity of the stove for a short while.

Soot on glass:

could be caused by the ﬁrewood is too wet.

• make sure that the stove is heated properly when ﬁring up, prior to closing the door

Stove is burning too strong:

could be caused by:

• leak around the door seal

• chimney draught too large >22 Pa, draught control regulator should be installed.

Stove is burning too weakly:

could be caused by:

• too small amount ﬁrewood

• too little air supply for room ventilation

• unclean smoke channels

• leaky chimney

• leakage between chimney and ﬂue

If your stove continues to malfunction, we recommend that you contact your RAIS dis-

tributor or chimney sweep.

WARNING!!

In case of chimney ﬁre:

• shut off all air supply from outside (if installed) to the stove

• contact the ﬁre department

• never attempt to put out ﬁre with water!

• afterwards, you should ask your chimney sweeper to check the stove and chimney

IMPORTANT!!

• to ensure safe burning there must be clear yellow ﬂames or clear embers at all times.

• the ﬁrewood should not be smouldering.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 152 153

No comments

RAIS Bionic Fire User Manual Page 48