RAIS RONDO User Manual download pdf (Page 16)

US English User Manual for RAIS Rondo, RAIS Mino II and RAIS Mino II Soapstone

Lighting and Stoking

Step 1 & 2:

To light the ﬁre, use ﬁre starters, newspa-

pers or something similar, as well as 2 kg

of wood split into thin logs for kindling.

The air control must be opened com-

pletely.

DO NOT USE GRATE OR ELEVATE FIRE – BUILD

WOOD FIRE DIRECTLY ON HEARTH.

Step 3 & 4:

Light the ﬁre and close the door, leaving

a 10-15 mm gap (under supervision) until

the ﬂames burn brightly. After approxi-

mately 5 to 10 minutes, close the door

completely.

Adjust the air control later if necessary.

Step 5:

After approximately 10-20 minutes, until

there is a good quantity of embers, add

two or three more logs. (Leave the door

slightly open until they catch ﬁre and

then close the door.)

Step 6 & 7:

Approximately ﬁve minutes later, when

the ﬂames burn clear and bright, close

the air control gradually, but not com-

pletely. Never close the air intake com-

pletely, while logs are still burning. This

will cause incomplete combustion, risk of

explosion, and soot on the glass.

DO NOT OVER-FIRE, IF HEATER OR CHIMNEY

CONNECTOR GLOWS YOU ARE OVER-FIRING.

It is a good idea to leave a 3/4” layer of

ashes in the combustion chamber, as this

will act as insulation.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 43 44

No comments

RAIS RONDO User Manual Page 16