RAIS Pilar User Manual download pdf (Page 70)

English RAIS/

attika

- U

ser manual for New PILAR / PILAR 13

Installation distance

To determine whether the wall next to where the stove is going to be installed is ﬂam-

mable, you should contact your building contractor or the local building authorities.

The hearth should be able to accommodate the weight of the stove. The chimney must

be independently supported by wall brackets or a ceiling support plate. The weight of the

stove is indicated in the brochure.

The stove should always be installed on a non-combustible hearth of a size and construc-

tion that is in accordance with the provisions of the current UK Building Regulations Ap-

proved Document J.

If the stove is to be installed on a wooden ﬂoor, it must be covered with a non-combusti-

ble material at least 12 mm thick, in accordance with UK Building Regulations Approved

Document J, to at distance of 300 mm in front of the stove and 150 mm to each side

measuring from the door of the combustion chamber.

The clearance distances to combustible material beneath, surrounding or upon the hearth

and walls adjacent to the hearth should comply with the guidance on the separation of

combustible material given in UK Building Regulations Approved Document J and also in

these stove instructions.

It must be ensured that no combustible objects (eg. furniture) are placed closer than the

distances given in the following tables (risk of ﬁre).

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 217 218

No comments

RAIS Pilar User Manual Page 70